Cyberhawk crosses the Atlantic to complete first survey in South America

south america cyberhawk

A UK-based aerial inspection solutions provider has its expanded its global footprint by undertaking its first UAV inspection in South America.

Cyberhawk was approached to conduct a close visual inspection (CVI) of an elevated flare stack at an onshore refinery in South America.

Prior to the UAV inspection, which was required because the flare was not burning correctly, an initial inspection of the flare stack had taken place with a ground camera and it was deemed that the entire flare tip should be replaced.

Story continues below

Because the level of detail and the views available from the ground camera were limited, the refinery operator sought a second, more detailed inspection and thus opted for a CVI using drones.

A spokesperson for Cyberhawk said: “Our team mobilised to South America and completed the full inspection within one day, with over 600 images, including thermal imagery, captured.

“After generating a detailed inspection report, it was deemed that a flare tip replacement was not required at this stage and all that was needed was to renew the pilot burners. This intervention has allowed the client to postpone a shutdown by several months, and means that a longer shutdown can be undertaken, where deeper maintenance can be carried out. UAVs can be used to monitor the flare system until that time.”

Tags : Arctic UAVCyberhawkdrone surveydronesUAV
Emma Calder

The author Emma Calder

Leave a Response